Non-conductive and non-corrosive clean agents are fire extinguishing materials that do not leave residue after evaporation. They are essential for many fire suppression systems, especially in industrial facilities that deal with high-value and/or highly sensitive materials. The Novec 1230 fire suppression system is a component of a fast, environmentally clean fire suppression system and is safe to use in populated areas. In-panel fire extinguishing systems Compared to the FM 200, which is often preferred for home use, the Novec 1230 has a discharge time of less than 30 seconds and is discharged through a network of pipes similar to the FM200. It is stored as a liquid under pressure with nitrogen as the propellant.
Novec 1230It is a chemical-based clean agent fire extinguisher for Class A, B and C fires. It consists of a mixture of carbon, fluorine and oxygen, which is discharged as a gas but stored as a liquid in nitrogen-pressure cylinders. This is why many call it "dry water" or "dehydrated water". Novec 1230, similar to INERGEN, is a safe, non-toxic, non-corrosive substance that leaves no residue after discharge. It is particularly suitable for applications involving irreplaceable papers and where electronic systems cannot be quickly shut down in an emergency. It is also a substance included in the in-panel fire extinguishing systems.
How Does Novec 1230 Work?
A fire occurs when three elements are present: a fuel source, oxygen, and heat. For any clean substance to extinguish a fire effectively, it must disrupt at least one of the parts of that "fire triangle." In this case, the Novec 1230 fire suppression system works to eliminate the heat in the fire triangle. The chemicals in it act to quickly remove the heat, usually within a few seconds. This can help put out a fire long before any water-based system is discharged, sometimes even before the fire starts!
Novec 1230 can be used in almost any industry, but the most common and useful applications are:
- data processing centers
- Electronic fields with sensitive or irreplaceable equipment
- power generation facilities
- Hospitals and other large medical facilities
- marine engine rooms
- Museums and art galleries
- rare book stores
- bank safes
Benefits of Novec 1230 Fire Suppression System
In-board fire suppression systems work exactly the same as FM200 and are also electrically non-conductive and non-corrosive. One of the most important aspects of Novec 1230 is that it is environmentally friendly with no Ozone Depletion Potential, meaning it has no impact on climate change. The main features of Novec 1230 fire extinguishing systems include: Colorless and odorless, Safe use in occupied areas, Small space is sufficient for the storage of cylinders, No Ozone Depletion Potential, so almost no impact on climate change Finally, for use in Class A and B fires has been approved.
The Novec 1230 fire suppression system is the best clean agent choice for many industrial plants. Here are some of the main reasons for this:
- It is the most environmentally friendly clean agent: Novec 1230 has zero ozone depletion potential and an atmospheric lifetime of only five days. All this means that it will not be subject to future bans like the FM-200.
- The safest cleaning agent: INERGEN may be the safest inert gas cleaning agent, but Novec 1230 is the safest cleaning agent for humans, sensitive products and the environment in general.
- It has an incredibly fast response time: Novec 1230 helps you extinguish a fire in seconds, effectively minimizing damage. It is known to put out fires before they even start.
- Evaporates immediately: Novec 1230 evaporates approximately 50 times faster than water, allowing for easy cleaning and short waiting times until production is up and running again.
Is Novec 1230 Fluid Dangerous?
Compared to the chemicals used in most fire suppression systems and in-panel fire suppression systems, 3M Novec 1230 fluid is not hazardous. Unlike carbon dioxide, the agent is considered safe to use in occupied areas. This means that there is no risk of suffocation or other serious health effects if the agent is left in a room with people in it. Toxicity studies indicate that 3M Novec 1230 fluid is not irritating to the skin, but may cause mild eye irritation. It is not carcinogenic according to the Ames test.
What are the Similarities and Differences Between FM-200TM and Novec 1230 Fluid?
3M Novec 1230 liquid and FM-200TM are different chemical compounds. 3M Novec 1230 fluid is a fluoroketone, while FM-200TM is a heptafluoropropane (HFC). Although both substances are clean substances and have similar properties, 3M Novec 1230 fluid is widely considered more environmentally friendly due to its low Global Warming Potential (GWP). In addition, liquid is stored as liquid and FM-200TM is stored as gas. However, both are discharged as gas when a fire suppression system is activated. Most importantly, both chemical compounds are safe in occupied areas and are effective in suppressing Class A, B and C fires.
What Gas Is Used in 3M Novec 1230 Fluid Systems?
In-board fire suppression systems element 3M Novec 1230 fluid is the brand name of the chemical compound (CF3CF3C(O)CF(CF2)3) manufactured by 2M. The fluid is stored as a liquid and is discharged as a gas when the fire extinguishing system is activated. There are many different fire suppression system manufacturers that use 3M Novec 1230 fluid, including Firetrace International. Some manufacturers offer fire suppression systems with generic (CF3CF3C(O)CF(CF2)3) not provided by 2M. These systems may work similarly, but they are not original.
evenos Novec 1230 fire extinguishing systems, produced with the quality of fire extinguishing vehicles, are designed in an extremely effective way and made ready for use. You can benefit from Evenos fire extinguishing systems for your home, workplace, private area or areas with high protection.
Be the first to comment