How to Save Electricity?

There are many ways to save electricity. One of these methods is to turn off the electricity when it is not needed. But electricity savings can also be made using electricity. The important point in saving electricity is to achieve the highest efficiency with the least amount of electricity. The more successful this optimization is, the more saving electricity it is so well done. The methods used to save electricity are:

• Using energy-saving light bulbs
• Positioning things correctly
• Do not open the oven door unnecessarily.
• Not leaving unused devices plugged in

1. Use Energy Saving Light Bulb

The energy-saving bulbs produced today provide the same illumination by consuming much less energy. The most efficient bulbs are those that are usually equipped with LED technology. Compared to conventional bulbs, this type of bulbs consumes much less electricity, provides the same level of illumination and can be used for a much longer life.

2. Position Items Correctly

Although it may seem simple to position the items in the right places, it is a method that can be effective on the electricity bill. In particular, placing items such as deep freezers and refrigerators in hot places increases the energy consumption of these devices. For this reason, devices such as refrigerators and freezers should be placed in places that do not receive sunlight and heat. In addition, since the walls have a heat absorbing feature, a minimum of 10 centimeters should be left between these devices and the wall.

3. Do Not Open the Oven Door Empty

Unnecessarily opening the oven door is one of the most serious mistakes that increase electricity consumption. A standard oven only operates at maximum capacity until it provides the required heat. Then it reduces the working capacity to conserve heat. At this point, the electricity consumption of the oven is also reduced. Since the heat inside the oven will quickly escape when the oven door is opened, the oven starts to consume more electricity to replace the lost heat. For this reason, the oven door should not be opened in vain.

4. Don't Leave Unplugged Devices You Don't Use

Devices such as phones and computers consume electricity as long as they are plugged in. Even if the batteries are fully charged, electricity consumption continues. Also, on some devices, this can lead to reduced battery life. For this reason, unused or fully charged devices should not be left plugged in. In addition, leaving the charger plugged in will result in loss of electricity, even if there is no device connected to the charger. Therefore, chargers should not be left plugged into the socket.

5. Bulk Iron Your Clothes

Another electronic device that requires the use of electricity is the iron. Moreover, an iron is a device that consumes much more electricity than many household appliances. The iron consumes the most electricity during the first warm-up. For this reason, turning the iron on and off continuously consumes much more electricity than turning it on and finishing the whole process in one go. Instead of ironing the clothes separately in the morning, evening, every day or every other day, saving and ironing them collectively can make a significant contribution in terms of electricity savings. Determining one day a week as an ironing day and saving and ironing the clothes every week can reduce the use of iron up to four times a month. This provides a significant saving in electricity.

6. Run the Washing Machine When Full

The electricity consumed is approximately the same whether the washing machine runs empty or full. That's why it's important to wait until it's fully loaded to run the washing machine. When the washing machine is operated with only a few items, it will soon need to be run for other items as well. This means re-consumption of electricity. Instead, it is much more advantageous to collect the dirty laundry and wash it in bulk so as not to exceed the capacity of the washing machine. Setting the washing machine to run once a week or every two weeks can make significant contributions to electricity savings.

7. Insulate Your Home

The thermal insulation system of the house and the building is among the factors that directly affect the electricity consumption. Thermal insulation is extremely important to both reduce the need for heating or cooling, and to ensure that various electronic devices work more efficiently even if there is no such need. In places with sufficient thermal insulation, much less energy is consumed to maintain the ambient temperature after the energy spent for heating or cooling the environment. However, if there is no thermal insulation, heating or cooling devices will have to consume more electricity in order to preserve the ambient air. In addition, there is much less need for heating and cooling in thermally insulated houses. Once the heating or cooling device is started, the ambient temperature can maintain itself for a long time and there is no need for any device to operate.

8. Use Smart Key Systems

Smart switch systems are systems that allow adjusting the brightness of the bulbs. A light bulb that consumes 70 W of electricity per hour under normal conditions can consume much less electricity by operating at a lower voltage with smart switch systems. In this way, it is not necessary to consume electricity for redundant lighting.

What are the Slogans About Electricity Savings?

Slogans about saving electricity are:

• Turn off the light, light up the future
• Don't underestimate electricity, you'll be hit
• A bright future will come with savings
• Continuity in production comes with savings in electricity
• Don't get electrocuted, don't be confused