Continuing its work on new generation air cleaners in Italy, France and Turkey, Noor Technology continues its R&D studies to increase the quality of indoor air without slowing down. Continuing its R&D and P&D activities based on scientific and industrial research for the formulation of the most advanced catalytic surfaces, in cooperation with Istanbul University-Cerrahpaşa, Noor Technology produces cleaning devices that do not create secondary pollution in the air, using photocatalysis technology.
Assoc. Dr. Sadullah Ozturk, Assoc. Dr.Arif Kösemen and Prof. Dr. Laboratory studies of air purification devices developed by expert engineers under the supervision of İsmail Boz are carried out at Istanbul University-Cerrahpaşa Institute of Nanotechnology and Biotechnology.
IT IS POSSIBLE TO GET FROM 99% OF GERD AND BACTERIA
People spend more than 90% of their time indoors such as home, office, car or shopping mall. Today, poor indoor air quality is considered one of the most serious threats to the environment and human health. The level of pollutants in indoor environments is much higher than in a typical outdoor airspace. It is necessary to eliminate sources of harmful volatile compounds in the indoor environment, such as synthetic building materials, furniture, consumer products, air fresheners, cleaning products and cigarette smoke, without creating secondary pollution. Air cleaning devices produced by Noor Technology destroy 99% of germs and bacteria in the air without leaving secondary pollution.
REVOLUTION OF PHOTOCATALYSIS TECHNOLOGY IN AIR PURIFICATION DEVICES
It is possible for organic/inorganic harmful substances to accumulate on the filters in air cleaning devices created with traditional methods. This contributes to the formation and increase of harmful microorganisms in the filter and in ambient conditions. For this reason, filters in air purification devices become a new source of contamination. Filter efficiency decreases and deterioration occurs in the filters. Unlike traditional methods in air purification devices, photocatalysis technology prevents impurities from adhering to the filters, causing the pollution to be broken down to the least harmful components. Thus, it is ensured that the filtered air remains clean without creating a secondary pollution source.
Noor Technology aims to eliminate harmful gases in the environment without creating waste by-products. Continuing to work for this purpose every day, the brand increases its expertise in the production of air cleaning devices that provide photocatalytic properties. Stating that the most important feature of photocatalytic agents is to decompose organic compounds without leaving harmful substances behind with the help of visible light or UV light, Noor Technologies engineers continue to work on the optimization and characterization of materials generally used in the experimental stage so that they have high activity, long-lasting use and high cleaning properties. continues.
CONTRIBUTION TO ECOLOGY WITH LED LIGHT
Entrepreneur Giuliano Regonesi, founder of Noor Technology, describes the emergence of the idea of air cleaners as follows; “When we set out, we started by considering the fact that we all spend most of our days at home. We increased our service areas by moving from homes to workplaces, schools, offices and restaurants. Especially in this period, we started to produce disinfection solutions for all places where air sanitation is the primary requirement.
Our aim was to find effective and efficient solutions against germs and bacteria harmful to human health and to have a sustainable cost on the other hand. Thanks to the use of LED light, our products are completely ecological. Environmental sustainability was the most fundamental element for us from the research phase. For example, our flagship product Sterile Tube it is made entirely of aluminum and contains no plastic”
Be the first to comment