What is Paste Polish, Does It Harm The Vehicle? How To Make Paste Polishing In Which Situations?

Paste polishing is a process that is applied to cover light scratch defects and in addition, it makes the car paint look brighter. The implications for my vehicle trading should also be considered, as it can give the car a better look and feel new. Here, the first question that comes to the mind of car owners is does wax polish damage the car? is happening.

Does wax polish damage the car? The question raises an answer that can vary depending on the situation. Paste polish made at the wrong time and by non-experts can result in some damage to your vehicle. Although polishing is a very easy process, it can cause some mistakes and some problems if a fine scratch is forgotten or if dust is not taken care of, even if it is small.

Paste and polish are two different materials. Knowing these materials as the same, which is a common misconception, is due to the application of these processes one after the other and their integration as pastry polish. This process normally consists of a system that takes place in two stages. While the paste process removes the paint of your vehicle, the polish is the process that covers the paint. Again, 'Does wax polish damage the car?' When we return to the question, this application does not harm the vehicle when it is done by an expert and with care, and it can even be seen as a regenerative application that creates a better visual. The material called paste used in the process is a chemical solvent and abrasive substance. They are numbered and separated according to the level of abrasion.

According to this abrasive level, the paste preference is adjusted according to the current condition of the vehicle. When we look at lacquer, it is a very diverse material with options such as Teflon or silicone. The polish in the nomenclature of the paste polish is an application applied after the paste. Although the paste is a process that is done by looking at the vehicle condition, if there is no need, it is possible to polish directly without making the paste. We need to know that the waxing process is not a system that provides or prevents paint protection.

In Which Cases Is Pastry Polishing Done?

Paste polish can be applied to remove intense scratches that may occur due to brush or harder factors during the external cleaning of the vehicle.

You can also use wax polish to remove scratches that may occur due to any reason that even your nail, which has a very small depth, cannot feel. It is also possible to use wax polish as an option for the unpleasant appearance caused by tree resins, insects and birds.

In addition to the sun or polluted air that may also occur seasonally, it would be a very logical choice to choose paste polish to correct the dull appearance that soap can also create.

There are situations that require many more paste polish or it makes sense to use paste polish. Unfortunately, making cake in deep scratches is not a sufficient method alone. Since the paste can only provide a wear in the scratch area, it can only transform this situation into a less depth form. The method with a logical and precise result to be preferred for deep scratches is known as local paint. Looking at the appearance damage caused by the sun, it will still be insufficient to make a cake. The warranty solution for this damage is the complete painting of the damage or the location of the damage.

How to Make a Paste Polish, What to Pay Attention to

The vehicle in which the cake will be made must be absolutely clean. Baking a muddy vehicle directly does more harm than good. For this reason, the vehicle should be washed before the cake, if necessary. After making sure that the vehicle is clean, a suitable place for the cake, namely a shaded, cool place is required. Baking under the sun causes the cake to dry out and burn on the paint surface, resulting in undesirable results. Then the cake with the most appropriate number for the vehicle should be selected. The paste number shows the abrasiveness of the paste to be used. Our vehicle is clean, the place is suitable and we chose our paste correctly. After bringing our polishing machine to the appropriate speed, the plastic parts that should not be touched by the machine or the paste are masked and we can start the process. Progress piece by piece is the most convenient method. In other words, it is not possible to drive a cake up to the trunk lid of the vehicle while still on the front hood. the hood ends to the door, the door ends to the other door. The same is true for polish. Making the cake by machine is more efficient and easier, but it is possible to make it by hand. It has difficulties but it is not impossible.

After finishing the cake process, the vehicle is completely washed and dried. All pastry residues are removed. Afterwards, by choosing the appropriate polish, the process begins on the condition that it proceeds piece by piece. The varnish is first applied to the surface, fed and then waited for it to dry. It will be difficult to wipe the lacquer that has not dried already. After the polish dries, we recommend using cotton to clean it from the surface. You will get a more elegant result. This is how the polish is completed. Its effect will last for 3 months under the best conditions. But if you do things like washing the car in the machine or with a brush after polishing, even 1 month is difficult. Paste or wax is not paint protection, and paint protection is not a substitute for paste. Both have different purposes. Think about it this way, how correct and logical it is to paint a car full of scratches where the cake can go. Not of course. We will explain paint protection in our other articles.