17 years by Sécheron SA des Turkey representative of the company, following service in Ankara Ostim Organized Industrial Zone opened in the year 2017 SÉCHERON Turkey Service Center has been completed.
· Izban E22000 tools 36 BVAC cutter control, repair, testing and adjustment of defective ones in service center
· İzban E22100 tools 42 pieces MACS cutter control, repair, testing and adjustment of defective ones in service center
· Tülomsaş E43000 Insulator replacement, test, adjustment and maintenance operation in Toshiba locomotive
· Replacement, test, adjustment and maintenance of the insulator at Tülomsaş E68000 locomotive
· Replacement, testing, adjustment and maintenance of broken insulator in E68000type locomotive in Malatya
. Marmaray vehicles test-adjustment-maintenance services are completed
· MACS training in Tülomsaş's E43000 lokos is given in Eskişehir
In addition, in case of using the insulator with broken vehicle, it is also important that the exits of the insulator and ex-factory tests of the insulator should be given to the operation after obtaining the conformity report in order to avoid serious negative consequences for the explosion and loss of life.
Due to the fact that the 8 item test, check and adjustment maintenance works that are given in the maintenance manuals published by Secheron and the maintenance times are not exceeded, the critical situation has been expressed again upon the insistence of Secheon.
Secheron once again underlines the importance of the subject against the accidents that may arise during the next period depending on the condition of the maintenance, control and adjustment we have stated.
1.Electrical leakage testing 40kV
2. Air tightness test
3.Internal pressure difference control test
4.contact range test-time (plate-sensor)
5. Main contact wear test (plate-gauge)
6.Circuit on-off test
7.Capacitor charge discharge test