Gantry Type Machining Machine
TURKISH WAGON INDUSTRY TÜVASAŞ / PURCHASING DEPARTMENT
Procurement of GANTRY TYPE SHEET MACHINE shall be procured according to the open tender procedure in accordance with the Article 4734 of the Public Procurement Law numbered 19. Detailed Information about the auction can be found down below:
Tender Registration Number: 2016 / 544577
1 of Administration
a) Address: MİTHATPAŞA MAH. MİLLİ EGEMENLIK CAD. NO: 131 54100 ADAPAZARI / SAKARYA
b) Telephone and fax number: 2642751660 - 2642751679
c) E-mail Address: firstname.lastname@example.org
ç) The internet address of the tender document (if any): https://ekap.kik.gov.tr/EKAP/
2-The subject of the tender
a) Quality, type and quantity:
1 PCS - GANTRY TYPE SHEET WORKING MACHINE
Detailed information can be obtained from the administrative specification contained in the tender document in EKAP.
b) Delivery areas: (for domestic bidders): TÜVASAŞ General Directorate-Mithatpaşa-Adapazari / Sakarya (for foreign bidders): Tender subject Gantry Type Machining Processing Machine, according to Incoterms 2010 CIP / TÜVASAŞ / Adapazari / Sakarya / delivered TURKEY It will be. The delivery of the Gantry Type Machining Machine subject to the procurement shall be made by the carrier or his / her agent to the TÜVASAŞ or his legal representatives without any charge. Bidding will be deemed to be accepted as guaranteed. Installation and commissioning of the supplied system (s) / equipment / components in TÜVASAŞ will be carried out by the contractor. The Contractor is obliged to comply with the Occupational Health and Safety regulations and take the necessary measures during the works to be carried out at the TÜVASAŞ factory site. The contractor TÜVASAŞ will be responsible for the compensation of their employees if they cause any material or moral damages to TÜVASAŞ during the works to be carried out at the factory site. Additional requirements for the installation and commissioning of the Gantry Type Machining Machine subject to the tender are specified in the Technical Specifications TŞ-40.411.
c) Delivery date: The subject of the procurement The term of the Gantry Type Machining Machine is 31.05.2018.
a) Location: TÜVASAŞ General Directorate - Mithatpaşa Mah., Milli Egemenlik Cad. No. 131, 54100 Adapazari / Sakarya / TURKEY
b) Date and time: 31.01.2017 - 14: 00
Tender notices published on our website are for information only and do not replace the original document. The original document is valid for the differences between published documents and original tender documents. Our sources are Official Gazette, Daily Newspapers, Public Institutions and Institutions web pages.